on โ13-09-2014 08:06 AM
It's time for the outdated kitchen fluo to come down but I have no idea what type of lighting works best in a kitchen .... Any suggestions pls?
on โ13-09-2014 08:59 PM
Thanks, martini. Will take a copy of that..
on โ13-09-2014 09:12 PM
Thanks for the info Martini
โ13-09-2014 09:32 PM - edited โ13-09-2014 09:34 PM
Thanks for starting this thread. I need to replace my kitchen fluorescent lights. The main one stopped working and the over the sink one is slow to light. Plus they're old looking. 3/4s through this thread I decided to fix them instead of replacing them, UNTIL...LED lights that look like the fluorescent lights.
I'm going with that one (didn't know they existed).
I hate the look of track lighting and find myself to tempted to look directly at them....it's like looking at the sun! I helped an old couple change some bulbs because even the lower power ones were too bright. I couldn't believe how hot they get and even the lower power ones were too bright. (out they went to get lower ones...again).
I'd have to hire an electrician to put in recessed lights and it is big job to put them in. You have to channel the wiring across the beams, spackle, paint, and then dealing with the insulation through the hole....it's a pain. (unless you have an open attic above)
I can convert to the LED lights and not pay someone else to do it...with ease. Youtube is loaded with videos on how to do it yourself. LEDS last 20 years, I'm in!
https://www.youtube.com/watch?feature=player_detailpage&v=MOoUv2mt9gM
Fire safety and electrical safety regulators across Australia have raised concern about an increase in building fires caused by heat from recessed lighting setting fire to building material and other materials.
Right, like a rats, mice, squirrels building nests around them.
On the subject of warnings....Beware of CFL bulbs made in china. There have been more then a few fires started by them, especially bad when used in recessed light fixtures. Here's a pic of one taken by a person who wittnessed the flame shooting out the side of it.
on โ14-09-2014 04:11 AM
@i-need-a-martini wrote:
@am*3 wrote:
Light globes are warm white or cool daylight. When would you use cool daylight ones?. I just grab any and don't notice till I get home what I have chosen.
Never in a house.
Old incandescents are a very warm white (between 2300-2800k). When you buy a light it should say Warm White or it should be between 2700-3000k light temperature.
Cool White is between 3000-4000k.
Anything above 3000k I would specify for an office environment or a garage.
Anything above 4000k I would specify in a warehouse or a supermarket.
Many people think that they are getting a whiter, brighter light when the light is Cool White particularly if they are used to an old, barely functioning incandescent light. But it just looks artificial and not very nice on your furniture or on your skin.
And even worse is when people buy at 4000k light because it is labelled as 'Day Light' so they assume it will make their house all sunshine-y and bright. It doesn't. It is a couple of steps away from the blue light they use to discourage addicts from shooting up.
thanks for this iinfo,martini!
โ14-09-2014 07:17 AM - edited โ14-09-2014 07:18 AM
I put those mini-halogen lights in place of recessed fluorescents.............big mistake.........I've already had 6 burn out in just over a year, and the clear glass globes that surround them are impossible to clean. I'm going to frame the area with 2x4s, sheet rock it, and install 4 can lights and two eyeball lights.........after which I will have a drywaller come in and match the knock-down texture to the rest of the ceiling.
on โ14-09-2014 07:34 AM
@jimmy*part3 wrote:Thanks for starting this thread. I need to replace my kitchen fluorescent lights. The main one stopped working and the over the sink one is slow to light. Plus they're old looking. 3/4s through this thread I decided to fix them instead of replacing them, UNTIL...LED lights that look like the fluorescent lights.
I'm going with that one (didn't know they existed).
I hate the look of track lighting and find myself to tempted to look directly at them....it's like looking at the sun! I helped an old couple change some bulbs because even the lower power ones were too bright. I couldn't believe how hot they get and even the lower power ones were too bright. (out they went to get lower ones...again).
I'd have to hire an electrician to put in recessed lights and it is big job to put them in. You have to channel the wiring across the beams, spackle, paint, and then dealing with the insulation through the hole....it's a pain. (unless you have an open attic above)
You could hire this one, Jimmy.
โ14-09-2014 08:17 AM - edited โ14-09-2014 08:19 AM
Think we will be going with something like the one Az choose, really like it. As I mentioned we we dont cook/washup at night so I think it will work for us. Our next project is the lounge room now THAT really is going to be a challenge lol
on โ14-09-2014 04:05 PM
I have two fluro lights in my kitchen like yours.... I keep thinking I should replace them to something more modern, however, nothing
would light the room up like they do..... so they have stayed.
on โ14-09-2014 04:19 PM
that is exactly what I used to have, very happy with my new one.
on โ14-09-2014 04:23 PM
Is yours a more modern version?.... just as good?.... light wise?.... I liked your pic.