Excuse me Tasfleur..

*pepe
Community Member

I saw your post on the thread about christmas thread but didn't want to hijack it.....  have you been making those fabric balls i gave you the links for?

 

can i see a pic?

Message 1 of 22
Latest reply
21 REPLIES 21

Re: Excuse me Tasfleur..

Thanks everyone (and Pepe), it's getting better by the day.  I didn't want to make them over frilly and lacy but the next lot most likely will be a little more embellished with pins rather than cutting into them if I can figure  out an easier way.  Will get the foam larger diameter this time, small makes it harder to push the fabric around.

Message 11 of 22
Latest reply

Re: Excuse me Tasfleur..

look on youtube for tutorials, i know i have seen some.

 

i'll post links if i can remember where i saw them.

 

 

edit;  http://www.youtube.com/watch?v=ou50tdNYpa8

Message 12 of 22
Latest reply

Re: Excuse me Tasfleur..

Anonymous
Not applicable
Very clever tas and pepe

I would be hopeless at that sort of thing .
Message 13 of 22
Latest reply

Re: Excuse me Tasfleur..

baubles

 

 

here are a few of mine, sorry if the image is too big.

 

I just picked up a nice lot of fabric to make some more.

Message 14 of 22
Latest reply

Re: Excuse me Tasfleur..

Anonymous
Not applicable
They are lovely pepe .
Message 15 of 22
Latest reply

Re: Excuse me Tasfleur..

Very sweet, clever people ๐Ÿ™‚

Message 16 of 22
Latest reply

Re: Excuse me Tasfleur..

decoration2.jpg

 

Pepe, I followed another of your links and ended up rushing off to the fabric store and getting something quite different than I had been working with already.  I also noticed that your decorations were much more even than mine so I decided I had to work to get them looking neater.  Ended up with a kind of dance tulle fabric with a sequin look, so far so good .. thank you again.

Message 17 of 22
Latest reply

Re: Excuse me Tasfleur..

wow i really like that!!  and the granite bench reflecting it too lol.

that fabric is really effective.

 

i found the trick to getting them even is to use rubber bands to mark iff the sections, fiddle with them until you are happy then press them into the ball then cut along the grooves they leave behind.

its easier to cut a straight line that way.

Message 18 of 22
Latest reply

Re: Excuse me Tasfleur..

Do you mean press the rubber bands into the balls themselves?

Message 19 of 22
Latest reply

Re: Excuse me Tasfleur..

yep, i press on the bands with the back of the scalpel so they actually dig into the foam and leave a groove.

then remove the bands and make your cut in that groove.

 

i found my lines were straighter than if i drew on it with a marker

 

Message 20 of 22
Latest reply